JMC focuses on Fresnel lens design, precision machining and performance testing to support reliable optical components for different detection applications.

Diamond Turning and Machining – Freeform 705G
SD-Turning Chuck Diameter: 10 μm (Industry general level: 20 μm)
Groove Peak R: < 3 μm;
Groove Valley R: < 12 μm (Industry general level: Peak R > 5 μm; Valley R > 20 μm)
Feed Rate: < 10 μm (Industry general level: > 10 μm)
The parallelism deviation between the turning profile shape and the ideal profile should be less than 1°.

JMC provides precision optical tooling manufacturing and inspection to ensure accurate tooling profiles and consistent quality for customized Fresnel lens production.

Automatic scanning test system with configurable parameters
Supports simultaneous testing of six samples
Four-axis automatic control and regulation
Full-size human testing with programmable speed, step and temperature
One-click test start and automatic test report generation
Optical darkroom with thermal insulation around the laboratory
Test repeatability deviation of less than 5%

The automated control system supports the following test settings:
Up to six channels for simultaneous testing
Simulator temperature settings (eight zones) and status feedback
Ambient temperature setting
Mounting height and inclination angle settings
Pattern settings: size, step spacing and speed
Repeat measurement
Interrupt request

Precision of angle: 0.1°
High precision: 0.1 mm
Forward and rear position accuracy: 0.5 mm

Temperature controlled by programming (precision: ±2°C)
Position accuracy: 1 mm
Height: 175 cm / Ground clearance: 5 cm

Supports simultaneous testing of up to six channels.
Contact JMC to discuss your optical design, machining and testing requirements.
Contact Us